Everything has to be a good fit: the quality, the price points, the customer service,
the marketing support and the company's vision for the line going forward.

Polyethersulfone Membrane Cartridges

PES Series for Electronics, DI Water, Chemical & Beverage Filtration

Product Information

  • Pnucor’s (PES), Polyethersulfone cartridges offer a wide array of micron ratings from .1 to 5 microns
  • All Polyethersulfone cartridges are produced in-house on the most modern equipment available
  • Complete in-house testing guarantees a superior and consistent product
  • Cartridges have excellent dirt holding capacity with low flow resistance
  • Naturally hydrophilic media does not need wetted before use
  • We offer all end cap configurations to fit your applications and housings
  • Polyethersulfone media is excellent for its low protein binding and chemical compatibility
  • Cartridges are manufactured to meet FDA Title 21 for food contact applications
  • Cartridges are constructed in a clean room environment
  • Cartridges may be ordered as final rinsed with 18 mega ohm water

Product Specifications

ToxicityPurity
Pnucor’s Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520. Cartridges are Free of Surfactants, Resins, Binders and Adhesives
Sterilization
Multiple Autoclaving for 30 Minutes at 250°F (121°C) under no End Load Conditions. In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180°F (82°C) for 1 hour.


Product Specifications
Retention Ratings .1, .22, .45, .6, .8, 1.2, & 5 micron
Membrane Polyethersulfone
Support Media Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Polypropylene
Maximum Operating Temperature 175°F
Nominal Diameter O.D. - 2.7"
I.D. - 1" center
Lengths 10, 20, 30, & 40 inch
Maximum Differential Pressure 45 psid

Build a Product Number

PolyethersulfoneMicronCartridge
Length
Core
Material
End Cap (Help?)Gasket/O-Ring18 Mega Ohm Rinse
PES.13E2BR
PES .1
.22
.45
.60
.80
1.2
5.0
3 = 10
5 = 20
7 = 30
9 = 40
E = Polypropylene 2 = 222/Fin
4 = 222/Flat
5 = 226/Flat
6 = 226/Fin
9 = Flat Gasket
B = Buna
V = Viton®
T = Teflon®
S = Silicone
N = Neoprene
D = EPDM
R
© 2011 Pnucor LLC
10525 Granite Street• Charlotte, NC 28273 | 1-800-849-8097
logo